Often, many travelers and tourists, especially inexperienced ones, have difficulty folding a modern tent. But in order for the design to be compact, take up a minimum of space and fit easily into a case, it is also important to lay it out correctly. Of course, detailed instructions are usually attached to all products, but not everyone is able to do everything right the first time. It is worth learning how to assemble a figure eight tent, since this method is the most common.
Currently, there are several types of tents:
- winter;
- fishermen;
- children;
- Chinese;
- automatic tents.
Winter tent assembly method
There are several types of winter tents:
- locked;
- Velcro;
- with outer frame;
- with inner frame.
Designs with locks and Velcro are slightly different from the usual ones, so at the time of their folding, you need to close everything, and then press one of the corners inward. The resultinga kind of book needs to be turned so that one of its corners is turned “on itself”. Then it remains only to press the lower ribs to the floor, and tilt the upper ribs down and forward. After it was possible to assemble the tent with a figure of eight, it needs to be packed in a bag.
If the internal arcs of the frame tent are not pulled out, then such a structure is assembled in the same way as described above. It is important initially only to get all the pegs installed around the perimeter out of the ground. A folded tent that does not fit in the bag means that the procedure was not performed correctly. Knowing how to correctly assemble a figure-eight tent with an internal frame, you can easily do a similar job with a model that has an internal frame.
Assembly of the fishing tent by figure eight
To assemble a fishing tent, you should initially give it a vertical position, pressing down one of the sides with your foot. Then hold the top with your hands and start twisting it 180 degrees. The ring formed during the twisting process must be bent down. Then connect the resulting one more ring with the first one and place the tent in the cover.
How to correctly assemble a children's tent with a figure of eight
Play children's tents are also divided into several types:
- frame;
- triangle houses.
In fact, all these structures fold up and fit in a case in a minute, freeing up a lot of space in the room. But sometimes it is impossible to cope with them ifnot know how to assemble a figure eight tent. The house of the first type is folded in the following way:
- you need to stand in front of one of the walls, while holding two opposite ribs with your hands;
- connect the left and right sides together;
- take the lower third of the resulting plane with your hands so that the roof of the tent is in the “away from you” position and put one hand behind the other, folding the ribs into a figure eight;
- rings of the resulting figure eight are stacked on top of each other, after which they are successfully placed in the case.
Also, knowing the basic principles will help to assemble a triangle house. To do this, it is necessary to keep one of the sides of the structure facing you and, pushing the rib to the opposite edge, insert it inside. To achieve a flat shape, fill the entire panel, leaving only the elastic band located at the bottom outside. Twist the middle and top to form a figure eight.
Assembly of Chinese tents
Recently, tourist tent structures made in China have become very popular. They attract many buyers not only for ease of use, but also for ease of assembly. But sometimes not everyone can figure out the instructions that describe how to assemble a Chinese figure-eight tent. Often difficulties arise at the very beginning of the process. So, at the beginning of the assembly, you need to fold the two side faces, holding one of the sides with your foot. The resulting oval will only need to be twisted into a circle. It is best to do this procedure together.
How to assemble a camping tent
Automatic tents, often referred to as semi-automatic, are characterized by minimal weight, as well as ease of installation and dismantling. The design pulled out of the case itself opens in the air, taking the form of an assembled model, if you shake it a little. Some outdoor enthusiasts have learned to create entire parking lots using similar tourist tents. Moreover, they can be installed and disassembled at any time of the day, under any weather conditions. However, there is one drawback associated with the manufacturability of the product, since its advantage turns into a real problem if you do not know how to assemble a figure-eight tent. The scheme is very simple, but if you are dealing with a double or triple design, with a vestibule and an awning, experts recommend practicing doing the procedure together, remembering all the folds and applying the appropriate effort.
Initially fold the model flat. Depending on the type of tent, you should end up with a square, rectangle or triangle. Then fold all sides into one and lay on the ground. Pull one of the ends towards you, pressing the tent against the opposite edge. As soon as you see that the arcs take the shape of a figure eight, twist them to form a circle.
It is worth noting that if the left-hander does not know how to assemble the tent with a figure eight, the dismantling scheme should be carried out simply in the opposite direction. Work out a little at home, after which you can already easilydo all the necessary manipulations in nature.
